Dynamic Cut Plane

Dynamic Cut Plane

img

(Available only in Platinum)

Default UI Menu: View/Dynamic Cut Plane

Ribbon UI Menu:

img

The Dynamic Cut Plane allows you to interactively create a cross section view of 3D objects. The Dynamic Cut Plane menu is accessed via the View menu.

To Use the Dynamic Cutplane tool.

  1. Go to View | Dynamic Cut Plane| Add

img

This will make the Cut Plane appear.

img

  1. Go to View | Dynamic Cut Plane and make sure that Show is selected/highlighted.

img

  1. Go to View | Dynamic Cut Plane| Edit

img

  1. Use the Selector to drag the Cutplane graphic laterally way from the object you want to view. This will give you a clear view of the object.

img

  1. You can now use the selector to move and rotate the Cut Plane to generate dynamic cross-sections.

img

img

img

img

To Remove a Cutplane

  1. Go to View | Dynamic Cut Plane.

img

  1. Click Remove.

Options

You can manage the appearance of the Dynamic Cut Plane by going to Options | Drawing Setup Dynamic Cut Plane . img

Cut plane

  • Active: If there is an active Cut Plane this is checked. If this is unchecked the active workplane will be removed.
  • Show: Sets whether the active Cut Plane is visible.
  • Cut section color: Sets the color of objects where they are cut.

Graphic

  • Color: Sets the color of the cut plane.
  • Transparency: Sets the transparency level (0 - 1). 0 = No transparency, 1 = Totally transparent.
  • Show border: Sets whether the border of the cut plane is shown.
  • Auto-update in accordance with drawing extents: Sets the extent of the cutting plane to update as the drawing extents changes.