Skip to content

Default UI Menu: Modify/Array/Linear

Ribbon UI Menu:

img

Creates copies of 2D or 3D objects along a straight line, in which each copy is separated by a specified distance.

  1. Select the objects you want to copy and activate Linear Copy.

  2. In the Inspector Bar, enter the number of Sets - the total number of objects that will result.

  3. Set the distance between adjacent copies by using the mouse to define the copy vector, or enter Step values in the Inspector Bar. The copy vector is defined from the reference point of the selection set.

img

Note: To make a single copy using a distance vector that does not start at the reference point of the selected objects,

  1. The copies are made after the vector has been defined.

img

Sets = 3

  1. Click anywhere to exit Select mode, or press Esc.

img

A good use for linear copy is for architectural smart object like windows. This feature became available in the TurboCAD 2017. img